Insignia NS-DXA1-APT, User Manual

Page: 9 / 24

7
Converter Box with Analog Pass Through
www.insignia-products.com
To set the output channel:
1 Press MENU . The SETUP menu opens.
2
Press or to select
Output Channel
, then
press or .
3
Press or to select channel
3
or
4
, then
press .
Changing channels
To change channels:
• Press CH or CH to select a channel in
the memorized channel list.
• Press the number buttons for the channel you
want. If you want a digital sub channel, press
the number buttons for the main channel,
press – , then press the number for the sub
channel. For more information about sub
channels, see “Digital sub channels” on
page 3.
When you use the number buttons to select a
channel, the Channel List appears. Press
or to select the channel, then press .
• Press RECALL to return to the last channel
you were watching.
• Press FAV to select a channel from the
Favorites list.
Adjusting the volume
To adjust the volume:
• Press VOL + or VOL – to increase or
decrease the volume.
• Press MUTE to turn off the sound. Press
MUTE
again to restore the sound.
Searching for channels
Your converter box searched for available
channels the first time you turned it on. If you
move your converter box to a new TV viewing
area, move your antenna, or if the available
channels change, you can search for channels
again.
To search for channels:
1
Press
MENU
. The SETUP menu opens.
2 Press , then press or to select Auto
Tuning , then press to start the search.
Your converter box searches for available
channels and stores the channel information
in the memorized channel list.
Adding new channels to the channel list
If new channels become available after the initial
search for channels or if you move your antenna
to tune additional channels, your converter box
can search for the added channels and add the
channel information to the memorized channel
list.
To add channels to the memorized channel
list:
1 Press MENU . The SETUP menu opens.
Note
You must use the remote control that came with
your converter box or program your existing
universal remote control to work with your
converter box. For instructions, see “Programming
the converter box remote control” on page 16.
Warning
If the volume is set too high when you press
MUTE
to
restore the sound, you may damage your hearing or the TV
speakers.
Note
For best performance, set the volume control on the TV to
mid-range, then use the converter box remote control to
adjust the volume.