background image

3

Insignia NS-BLSS02 Blender

www.insigniaproducts.com

8

Do not use outdoors.

9

Do not let power cord hang over edge of table or counter or touch hot 
surfaces.

10

Do not place on or near a hot gas or electric burner, or in a heated 
oven.

11

When blending hot liquids, remove center piece of two-piece cover.

12

Use extreme caution when moving your blender when it contains hot 
food, water, or other hot liquids.

13

Keep hands and utensils out of the container while blending to reduce 
the risk of severe injury to persons or damage to your blender. You can 
use a scraper, but only when your blender is not running.

14

Blades are sharp. Handle carefully.

15

To reduce the risk of injury, never place cutter assembly blades on the 
blender base unless the pitcher is correctly attached.

16

Always operate your blender with the cover (lid) in place.

17

Do not use your blender for other than its intended use.

18

To disconnect, turn control dial to OFF, then unplug the power cord 
from power outlet.

19

FOR HOUSEHOLD USE ONLY

SAVE THESE INSTRUCTIONS

Plug your blender into an AC power outlet (ordinary household current). Do 
not use any other power outlet.

DO NOT OPERATE YOUR BLENDER IF THE POWER CORD SHOWS ANY 
DAMAGE, OR IF YOUR BLENDER WORKS INTERMITTENTLY OR STOPS 
WORKING ENTIRELY.

A short power-supply cord is provided to reduce the risk of becoming 
entangled in or tripping over a longer cord. Longer, detachable power-supply 
cords or extension cords are available and may be used if care is exercised in 
their use. If a longer, detachable power-supply cord or extension cord is used,

The marked electrical rating of the cord set or extension cord should be at 
least as great as the electrical rating of the appliance.

The cord should be arranged so that it will not drape over the counter top 
or tabletop where it can be pulled on by children or tripped over 
unintentionally.

Summary of Contents for NS-BLSS02

















Reviews: