BE
CAREFUL!
USING YOUR ADAPTER
Warning
: If your device does not work, immediately unplug the adapter,
then check the voltage and polarity settings. Do not attempt to power
multiple devices at the same time through the tip and USB connections.
• Connect the adapter to your device, using one of the available
DC tips, then connect it to a power outlet. Use or charge your
device as usual.
OR
• Connect a USB charging cable from the adapter to your device,
then connect the adapter to a power outlet. Use or charge your
device as usual.
TROUBLESHOOTING
My device isn’t working.
• Immediately unplug the adapter.
• Check the polarity of your device. If your device has a negative
polarity, do NOT use this adapter.
• Make sure that your device requires less than 1,300 mA (1.3 A) of
current (or 2,100 mA (2.1 A) for 5 V, 2.1 A USB connection).
• Make sure that the voltage selector is set to the correct voltage.
• Make sure that you have selected the correct tip.
• Do not connect a device to the USB port and tip at the same
time.
My adapter is hot.
• It is normal for an adapter to feel warm during use. Make sure
that it is placed in a well-ventilated area.
• If your adapter feels abnormally hot, check your adapter’s
settings and make sure that it is compatible with your device.
SPECIFICATIONS
•
Cable length
: 4.9 ft. (1.5 m)
•
Input
: 120 V AC
•
Output
: 3, 4.5, 6, 7.5, 9, or 12 V DC 1,300 mA (1.3 A), or 5 V, 2.1 A
LEGAL NOTICES
FCC Statement
Caution
: Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Canadian Notice
CAN ICES-3 B/NMB-3 B
V3 ENGLISH 20-0253
Check out these important safety
instructions to keep yourself and your
devices safe.
Warning
: Identifying the correct voltage and polarity settings and
adjusting the product is the user’s responsibility.
• This adapter should only be used with a 120 V power outlet.
Follow all necessary safety precautions.
• Not recommended for use by children.
• Failure to adjust the adapter settings to match your connected
device’s requirements can result in damage to the device.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2020 Best Buy. All rights reserved.
