Insignia NS-AC10PWH9, User Manual, Page: 16 / 21

www.insigniaproducts.com 16
Portable Air Conditioner
Emptying the water collection tank
When the internal water collection tank is full, “FL” appears on the LED display and your air conditioner turns off until the
tank is emptied.
Manually drain water
1 Unplug your air conditioner, then disconnect the exhaust hose from the back.
2 Move your air conditioner to a location where a suitable drain is available or place a drain pan under the unit that is
capable of holding up to 1.37 pints (0.65 liters) of water.
3
Remove the rubber plug from the drain outlet and insert a syphon hose (not included) into the opening.
4 Syphon the water from your air conditioner.
5 After you have drained the water collection tank, replace the rubber plug, making sure that the bolt is secure.
6 Place the air conditioner in the desired location, reconnect the exhaust hose, then plug it in. When the air conditioner is
restarted after being drained, it automatically starts in COOL mode with a temperature setting of 72°F.
Automatically drain water with a hose
1 Unplug your air conditioner and move it to a location where you can work on it.
2 Remove the rubber plug from the unit.
Notes:
• When operating or draining water from your air conditioner, always protect carpeting and floors from possible water spillage.
• When you drain the water from your air conditioner, be sure to wipe up any spilled water with a dry cloth or towel.
Note: Drain your dehumidifer manually before connecting a drain hose. See “ Manually drain water ” on page 16 .
Drain outlet
Filter case
Rubber plug
Rubber plug