www.insigniaproducts.com
14
Portable Air Conditioner
Using the air conditioner
You can control your air conditioner by using the control panel on the front of the unit, or by using the remote control. If
using the remote control, always point it at the air conditioner.
BUTTON DESCRIPTION
Press to turn your air conditioner on or off:
• When you turn the air conditioner on, you will hear a tone and the air discharge
automatically opens.
• When you turn your air conditioner off, you will hear a tone and the air discharge closes.
Control settings, such as Mode, Set Temperature, and so on, are retained in memory
when the power is off (unless the unit has been unplugged).
Press to cycle through the operating modes (COOL, FAN, or DRY):
•
COOL
: The compressor runs and cools the room. Use the
or
and SPEED buttons to
set the desired temperature and fan speed.
•
FAN
: The fan circulates the air, but the compressor does not run to cool it. Use the SPEED
button to set the desired fan speed.
•
DRY
: The dehumidifier runs to remove humidity from the air. After the ambient
temperature is reached the compressor turns off. The fan speed is preset and cannot be
adjusted. We recommend that you use a drain hose in dry mode (see “
for instructions).
Note:
The LED next to the Mode button displays the active mode. The default mode is COOL.
Cycles through the available fan speeds. The LED next to the SPEED button displays the fan
speed. The speed can be selected in either the COOL or FAN modes.
•
COOL mode
: Press to adjust the temperature setting up to 86°F (30°C) or down to 60°F
(16°C), in one degree increments. The temperature can be switched between Fahrenheit
and Celsius by pressing
and
at the same time, or by pressing the °C/°F switching
button on the remote control.
Note
: In fan and dry modes, the temperature displayed is the room temperature (not the
set temperature). In COOL mode, the thermostat in the air conditioner runs the
compressor until the set temperature is reached, then the compressor cycles on and off
to maintain the set temperature.
•
TIMER mode
: Press
or
to adjust the delay time from one to 24 hours, in one hour
increments. If you press and hold
or
, the set temperature or time changes
automatically.
Press to set your air conditioner to turn off or turn on after a delay of up to 24 hours.
•
Automatic off
: Press
or
while the air conditioner is running to set the delay time
from one to 24 hours, in one hour increments. The air conditioner automatically turns off
when the set delay time is reached.
•
Automatic on
: Press
or
while the air conditioner is off to set the delay time from
one to 24 hours, in one hour increments. The air conditioner automatically turns on when
the set delay time is reached.
Press the
TIMER
button to see the delay time you have set on the LED display.
To change the set delay time (on or off):
Press the
TIMER
button, then adjust the time with the
or
buttons when the number
begins to blink.
To cancel the Timer function:
Press the
TIMER
button, then press it again when the number begins to blink.
Note:
Do not unplug the air conditioner while using the Timer function. After setting the Timer
function, if you use the remote control to change to another mode without resetting the Timer
function, the timer is reset.
Press to turn on the automatic oscillation, which varies the direction of the air flow to cool the
room more efficiently.
MODE
SPEED
TIMER
SWING