12
Insignia NS-A3111 DVD Executive Shelf System
www.insignia-products.com
Setting the clock
Press
STANDBY/ON
on the front panel to put
the unit into standby mode.
To set up the clock:
1
Press and hold the
SOURCE
button on the
front panel until the hour display is flashing.
2
Press
or
on the front panel to
adjust the hour.
3
Press the
SOURCE
button again until the
minute display is flashing.
4
Press
or
on the front panel to
adjust the minute.
P
l
ay
i
ng a DVD, CD, or VCD
Regional code
Your shelf system has a regional code
(1) printed on the back of the case. Your
shelf system can play only DVDs
labeled with the same regional code (1)
or
ALL
.
Playable discs
You can play the following discs on your shelf
system:
•
DVD-Video
•
DVD-R, DVD-RW, DVD+R and DVD+RW
DVD-R and DVD-RW discs must be made in
Video DVD mode. DVD+RW disc must be
made in accordance with the specifications
for DVD+RW disc with a 4.7 GB capacity.
•
Video CD (VCD)
•
Super Video CD (SVCD)
•
Audio CDs
•
CD-R and CD-RW
This player can play most CD-R and CD-RW
discs. Depending on the recording
conditions, however, you may find that not all
discs play successfully.
•
MP3 Files on CD-R or CD-RW
MP3 files should be ISO 9660 or JOLIET
format. If the sampling frequency is 44.1 or
48.1 KHz, and the fixed bit rate is 128 Kbps
or higher, MP3 files can be played. Some
files may not play depending on condition or
formats.
•
WMA Files on CD-R
If the sampling frequency is 32KHz, and the
fixed bit rate is 128Kbps or higher, WMA files
can be played. Some files may not play,
depending on condition or formats.
•
JPEG Files on CD-R or CD-RW
This player can play JPEG files with a
resolution of up to five million pixels. Certain
JPEG files cannot be read by this player.
Using the remote control to play a DVD, CD, or VCD
Note
You will need to reset the clock every time you
unplug the unit.
Notes
•
Most DVDs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your shelf system’s
regional code or the DVD cannot play.
•
If you try to play a DVD with a different regional
code than your shelf system, an error message
appears on the TV screen.
1
#
Button
Function
1
TITLE
Press to display the Title menu, if present
on the disc. This feature works for DVD
playback only.
2
(Stop)
Press once to stop the current playback
instantly and enter the Resume Play
mode.
Press
(Play) to resume playback from
the point at which you last stopped the
disc.
Press twice to stop playback completely.
You cannot resume playback. Press
(Play) to start playback from the
beginning of the disc.
3
MENU
Press to display the disc menu.
Note:
Playback stops to display the menu. The
button does not work for CD playback. For
VCD, this button is only available when PBC is
set to on.
DAV8611
