38
NS-32D220NA18/NS-43D420NA18
www.insigniaproducts.com
• If you select
Cable from the wall
or
Antenna
your TV starts scanning for channels and
displays a progress screen.
15
Press
ENTER
to close the wizard. If you selected:
•
Cable from the wall
, or
Antenna
, your TV tunes
to the first channel it found in the scan.
•
Cable/Satellite box
, press
INPUT
to open the
INPUT SOURCE
list, press
or
to select the
video input (
HDMI
or
AV
) you connected the
box to, then press
ENTER
. Your TV switches to
the input you selected.
Understanding the basics
This section covers basic information for:
• Turning your TV on or off
• Selecting the video input source
• On-screen menu overview
• Navigating the menus
• Selecting a channel
• Adjusting the volume
• Viewing channel information
Turning your TV on or off
1
Make sure that the power cord is connected to a
power outlet.
2
Press (power) to turn on your TV. The power
indicator turns off.
3
Press (power) again to turn off your TV. Your TV
enters standby mode, and the power indicator
turns red.
Note
You can press
EXIT
to stop the auto channel
search, but you will need to run the auto
channel search again to create a channel
list.
Warning
When your TV is in standby mode, it is still
receiving power. To completely disconnect
power, unplug the power cord.
Note
If your TV does not receive an input signal
for several minutes, it automatically goes
into standby mode.
