2
Setup and Maintenance of the Receiver
Do not connect to the AC power cords until all
are completed.
apparatus
Do not use your receiver immediately after transferring
from a cold place to a
it
warm place due to the risk of cond-
ensation.
Do not expose your receiver to water or excessively
temperatures.
high
After having disconnected your receiver, clean the
with a soft cloth, or with a slightly damp leather
Never use strong solvents.
case
chamois.
Protect Your Receiver From Overheating
Do not block ventilation holes.
Arrange receiver
so
the
that air can circulate freely.
Do not stack the receiver and other components dire
on top of each other.
ctly
Allow adequate ventilation when placing your receiver
stand.
a
Place an amplifier near the top shelf of the stand so
air rising from it
have a satellite receiver, you should place
shelf.
heat-
ed If
you
it on the top
will not affect other
components.
Provide spaces for sufficient ventilation.
15. Cleaning -
Unplug this unit from the wall outlet before cle-
aning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
16. Power lines -
An outdoor antenna should be located away
from power lines.
17. Object and Liquid Entry -
Care should be taken so that
objects do not fall and liquids are not spilled into the enclosure
through openings.
Note:
To CATV system installer's (U.S.A.): This reminder is
provided to call the CATV system installer's attention to
Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the
cable ground shall be connected as close to the point of
cable entry as practical.
Important Safety Instructions
