Operating Your Receiver
Remote Control Function
1.I
selector
2.
3. Number 1-8 button
Press these button to select preset tuning channel.
4. Tuning scan button
5.
6.TEST
Outputs the test tone to adjust the speaker levels.
7. S
8.DTS & DTS ES mode selection button
9.DTS Neo:6 Cinema/Music mode selection button
10. POWER
11.A/B/C/D
nput
Selects the input source you want to listen to or watch.
FM/AM band switches button
Press the button to switch the reception band between FM
and AM.
Press the SCAN+
side to tune in to a higher Frequency.
Press the SCAN-
side to tune in to a lower frequency. Press
and keep two second minutes, scan automatically.
Master volume
ET MAIN MENU button
Press these buttons to turn the unit into the SET MAIN
MENU mode.
Select an item of menu by using the or buttons. the
name item of menu will be displayed on the display, then
press the or buttons (or turn
ADJUST
knob on the panel)
to adjust or set it' parameter or range.
Note:
Input
sources
must be DTS or DTS ES
Press this button to set this in the standby mode.Press again
turn on the power of this unit.
Controls the output level of all audio channels.
-encoded.
Selects one of the 4 preset station groups (A to D), when
the unit is in tuner mode.
12.
13. MUTE
14. DSP mode selection button
15. Dolby Digital & Dolby Digital Surround EX mode
selection button
16. 2 channels stereo mode & 6 channels stereo
mode selection button
17. Dolby Pro logic II Movie/Music mode selection
button
18.
S
10min,20min,30min,40min, 50min,60min,
70min,80min,90min,100min,110min,120min.
Stores a station in the memory
6 DSP modes:
,
,
,
,
,
Mute the sound. Press again to restore the audio out to the
previous volume level.
Note:
SLEEP button
ets the sleep time:
Live Disco Jazz Classic Hall Rock.
Input
sources
must be Dolby digital or Dolby Digital Surround
EX
-encoded.
16
