6
WARNING:
•
Do not move or tilt the CD player when there are discs in the tray. Discs can slip out of
place and jam the tray mechanism, or damage the optical assembly.
•
Do not turn the disc tray manually by hand when the tray opens or discs may jam.
•
When the CD door opens for disc adding/replacement, one CD slot will be fully expposed.
Do not attempt to load more than one CD at a time without pressing DISC SKIP and
advancing to the next open CD slot. Failure to do this will cause a disc jam.
PLAYING A CD/MP3/WMA
1. Press the STANDBY button once to turn the unit on.
Note: When power is on, the unit will check the carousel automatically until the icon appears.
2. Press the OPEN / CLOSE button; the unit will check the carousel automatically. If a disc is
present, the unit will default to the first numbered tray (starting at 1), and begin play.
NOTE: If playing in NON-CD FORMAT, "ERROR" will show on the LCD display, and the
unit will stop.
3. Press DISC SKIP buttons on either the player or remote to skip to the desired tray.
CD OPEN / CLOSE BUTTON
Push OPEN/CLOSE button once, the tray will open. Discs change by pushing DISC SKIP
button to select the desired tray. Push OPEN/CLOSE button again, the unit will close and
automatically scan and show on the LCD which discs are present.
Note: When press OPEN/CLOSE button for entering tray on playback mode, the tray will
rotate two rounds automatically for CD disc checking before finally loading.
PLAY / PAUSE FUNCTION
Press PLAY/PAUSE button once to start the selected disc playing from track 1. Pressing PLAY/
PAUSE during playback will pause the music. Pressing PLAY/PAUSE again will resume the
playback from the point where it was paused.
STOP FUNCTION
Note: This function operates when the discs are in PLAY mode only.
Press the STOP button to halt playback or abandon pause mode. Pause and track data is
reset by pressing the STOP button, so pressing PLAY/PAUSE after STOP will cause playback
to start at the beginning of track 1.
MODE FUNCTION
Note: This function operates when the discs are in PLAY mode only.
The unit normally plays through the following seven playback modes:
Repeat 1
→
Repeat 1 disc
→
Repeat ALL disc
→
Random ALL disc
→
Random 1 disc
→
Intro 1 disc
→
Intro ALL disc
• To repeat one track, press the MODE/PROG button once.
• To repeat one disc, press the MODE/PROG button twice.
• To repeat all discs, press the MODE/PROG button three times.
• To play tracks on all discs in a random order, press the MODE/PROG button four times.
• To play tracks on one disc in a random order, press the MODE/PROG button five times.
• To play the intro (first ten seconds) of all tracks on one disc, press the MODE/PROG button
six times.
• To play the intro of all tracks on all discs, press the MODE/PROG button seven times.
