www.insigniarange.com
Last Modified: 08/02/2018
13
Step 4
Now meet the front of the shower with the back panels.
Once you are happy with the alignment, run a bead of
silicone
up
the edge and along the inside of the front fixed glass. Then continue
apply
RubberGum
along the bottom of the panels and frame and
screw together using the
ST20
screws and
SW9
washers
Step 3
Now attach your inner uprights to your front fixed glass panels by inserting these over
the thin rubber seals as shown by the arrows in the image.
Next screw the inner uprights to your curved rails using the
ST25
screws.
(please note that the front uprights will need a pilot hole drilled before screwing)
