insigniarange.com
Last Modified:10/10/2019
12
Step 3
Apply
silicone
to the specified area
’
s as shown and now fix
together and screw the large back glass panel to the column using the
ST20
screws.
Step 2
(please note, if your column has a rubber seal at the bottom , take the rubber off
and apply
silicone
inside the rubber and replace)
Again,
Once you have completed a dry run
and are happy, Then continue to
apply the silicone to the specified area of the control column and place next to the
angled back glass panel and fix together using the
ST20
screws.
Step 2
