www.insigniarange.com
Last Modified: 19/06/2017
18
Door Seals
Magnetic Seal: Push the magnetic door seal on the handle side of the glass door ensuring
this is tightly fitted.
Rear Door Seal: Place the rear door seal on the opposite side to the magnetic strip ensuring
the flap is facing the fixed glass panel
Handle
Ensuring that the inner thread is protruding out from the
handle far enough, place the handle on the outside of the
door and secure by tightening the inner chrome knob to
the protruding inner thread.
Ozone (o3)
Unscrew the chrome pepper pot end and drop the white box
upside down into the rear hole as shown in the image. Now
from the inside of the shower re
-
attach the chrome pepper
pot end and tighten.
Monsoon Head
Attach the grey hose from your valve to the inner black
tube using PTFE tape (please note this only needs to be
hand tight. Over tightening will snap/damage the inner
black tube)
Thermostatic Probe
Insert the chrome sleeve into the hole situated below the control
panel and secure in place with the retaining nut. Insert the rubber
grommet into the sleeve and push the probe through from the rear
of the cabin ensuring the probe protrudes no more than 6mm. Place
a small amount of silicone behind to fully secure in to place.
