www.insigniarange.com
Last Modified: 11/07/2018
13
Step 2
The next step is to attach the uprights (
maybe pre
-
fitted to the front fixed glass see
above)
to the curved rails using the
ST25 (3.5)
screws. The end with the groove is
designed to sit on the tray, with the flat end connecting to the roof. Please note the
‘
U
’
shaped channel is meant to face inwards to allow the glass to fit correctly.
(wider rail with Insignia logo at the top)
PLEASE NOTE
The screw head needs to bypass the OUTER hole. If this does not occur please bore
out the outer hole only by about 2
-
4mm
IMPORTANT
If your front fixed glass has 2 black uprights pre
-
fitted please bypass steps 3 and 4
Please note the wide upright is the outer upright and the cut out sits on the tray side.