www.insigniarange.com
Last Modified: 11/07/2018
12
Step 1
Align the 2 back panels with the central column and fix together using the
ST20 screws
and
SW9
washers. You will need to align the panels and then
use the drill piece to create pilot holes for the screws.
Once you are happy with the alignment, remove the panels and run a bead
of
silicone
up the sides and
RubberGum
along the bottom of the column
and the back panels yet
DO NOT
fix them to the tray until
STEP 5.
(please note, if your column has a rubber seal at the bottom, take the
rubber off and apply silicone inside the rubber and replace)
