NOTE
Hand tighten screws to
15in. lbs. Torque,
Max.
To adjust luminaire, loosen
(4x) set screws
. Rotate
luminaire to desired rotation. Set rotation by tightening
(4x) set screws
.
DO NOT OVER TIGHTEN.
INSTALLATION INSTRUCTIONS
Insight Lighting Phone: (505)345-0888 Fax: (505)345-3838 Web: www.insightlighting.com
*Insight Lighting reserves the right to make changes to this product and related installation instructions at any time without prior notice.
CAUTION:
INSIGHT LIGHTING IS NOT RESPONSIBLE FOR THE
STRUCTURAL INTEGRITY OF THE BUILDING TO
SUPPORT THE LUMINAIRE. ADDITIONAL BACKING
MAY BE REQUIRED.
CAUTION:
THIS IS AN ELECTRONIC DEVICE. CARE MUST BE TAKEN
DURING STORAGE AND HANDLING. STORE IN A CLEAN, COOL
AND DRY LOCATION. ELECTROSTATIC DISCHARGE (ESD) CAN
HARM THIS PRODUCT. AVOID STATIC DISCHARGE WHILE
HANDLING THIS PRODUCT.
WARNING:
INSTALL PRODUCT IN ACCORDANCE
WITH LOCAL AND NATIONAL ELECTRICAL
CODES.
WARNING:
FAILURE TO COMPLY WITH THE
INSTALLATION INSTRUCTIONS MAY
RESULT IN DEATH OR SERIOUS INJURY
WARNING:
READ ALL SAFETY INSTRUCTIONS
INCLUDED WITH LUMINAIRE BEFORE
INSTALLING LUMINAIRE.
MEDLEY X
PAGE 1 OF 1
REV N/C
IS11208-1.DWG 06MAR19 JW
WHITE & STATIC
COLOR
ACTIVE WHITE
COLOR CHANGING
EAM-EXTENDED ARM
MULTIPLE MOUNT
UP & DOWNLIGHT
REMOTE
MULTIPLE
CONFIGURATIONS
ELECTRICAL CONNECTIONS
7
Slide canopies down mounting arms toward mounting plates. Magnetic attachment
will occur.
ATTACH CANOPIES
8
FINAL ADJUSTMENT
9
Connect luminaire power cable to leads from power
supply. See attached power supply instruction sheet.
Make all electrical connections as per any local and/or
NEC codes. Repeat for all luminaires.
See Wiring Details and
Wiring Layouts for
more information
NOTE
