Page 8
GBxCart RW Manual
Revision 7
v1.1 – 4 April 2017
•
Updated some text labels
v1.0 – 11 March 2017
•
Initial Release
GB Camera Saver
v1.0 – 12 July 2017
•
Initial Release
Hardware/Firmware Revision History
PCB v1.1
(Firmware R2) – 8 May 2017
•
Added extra nop when reading Gameboy Camera SRAM as some of data would change sometimes leading to
artifacts on the pictures
•
Changed A0-A23 address when preparing to read EEPROM from 0xFFFFFF to 0xFFFF00 to support GBA 32MB
carts
(Firmware R1) – 27 April 2017
•
Switched from ATmega32A to ATmega8515L, some assigned ports have changed
PCB v1.0
(Firmware R2) – 8 May 2017
•
Added extra nop when reading Gameboy Camera SRAM as some of data would change sometimes leading to
artifacts on the pictures
•
Changed A0-A23 address when preparing to read EEPROM from 0xFFFFFF to 0xFFFF00 to support GBA 32MB
carts
(Firmware R1) – 11 March 2017
•
Initial Release (Errata - The switch operates in reverse, for example, moving it to the left should select 3.3V but it
selects 5V and moving it to the right should select 5V but it selects 3.3V.)
(c) 2017 by insideGadgets
http://www.insidegadgets.com
This work is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License.
http://creativecommons.org/licenses/by-nc/3.0/
