background image

Department of Communication (DOC) No-
tice (Canada only) 

This Class B digital apparatus meets the requirements 
of the Canadian Interference-Causing Equipment 
Regulations. 

Cet appareil numérique de la Classe B respecte toutes 
les exigences du Règlement sur le matériel brouiller du 
Canada. 

European Community - CE Mark 

Declaration of Conformity (DOC) 

According to ISO/IEC Guide 22 and EN 45014 

Manufacturer’s Name:

      Inside Out Networks 

Manufacturer’s Addr.:

      248 Addie Roy, Suite B-103 

                                            Austin, Texas 78746 USA

 

declares that the product 

Product Name:

                  Edgeport/2 

Model Number(s):

             301-1000-02, 301-1006-02, 

                                            301-1006-29 

Product Name:

                  Edgeport/4 

Model Number(s):

             301-1000-04, 301-1006-49, 

                                            301-1006-04, 301-1016-01 

Product Name:

                  Edgeport/8 

Model Number(s):

             301-1002-08 

Product Name:

                  Edgeport/21 

Model Number(s):

             301-1000-21 

Product Name:

                  Edgeport/421 

Model Number(s):

             301-1004-21 

Product Name:

                  Edgeport/416 

Model Number(s):

             301-1016-16, 301-1000-10 

Product Options:

              All

 

conforms to the relevant EU Directives listed here:  

                      EMC Directive 89/336/EEC | 
                      Low Voltage Directive 73/23/EEC 
                      Amending Directive 93/68 EEC 

using the relevant section of the following EU 
standards and other normative documents: 
Safety:  

IEC 950:1991 +A1, A2, A3, A4 

 EN 60950:1992 + A1, A2, A3, A4

 

EMC for All Edgeports Listed Above Except Edge-

port/416

 

           EN 55022 Class B (1994 w/A1 1995) 

             EN 50082-1:1992 - Immunity to Electromag-

netic Disturbance 

             IEC 801-2 

 IEC 801-3 
 IEC 801-4 

EMC for Edgeport/416 Only 

The following summarizes the specifications and re-
quirements for EN55024, EN55022 Class B & CISPR 
22 Class B emission and immunity tests performed on 
the USB Serial Port & Hub

Edgeport/416 only. If the 

actual test levels are higher or different than required, 
these levels are listed in the appropriate tables. 

EN 55022 Class B (1994 w/A1 1995) 

EN55024 (1998) 

FCC Regulation - Part 15 

Declaration of Conformity (DoC) 

This device complies with the requirements of the 
Code of Federal Regulations listed below: 

FCC Title 47 CFR, Part 15 Class B for a digital device. 

Operation is subject to the following two conditions:  

1

. This device may not cause harmful interference, and 

2

. This device must accept any interference received, 

including interference that may cause undesired opera-
tion. 

European Contact 

Dan McCarthy

 

Digi International 
Joseph-von-Fraunhofer Str. 23 
44227 Dortmund,  GERMANY 

UL/CSA Safety Information 

This device complies with the requirements of following 
safety standards below:  

                      UL 1950, 3rd edition 
                      CSA No. 950 

Quality Manager, Austin, Texas                           02/01 

Copyright 2001 by Inside Out Networks. All rights reserved. Information in this documentation is subject to change 
without notice and does not represent a commitment on the part of Inside Out Networks Inc.  

Test  

Specification  

EN55022  

Requirement 

Radiated 
Emissions  

— 

Class B 

Conducted 
Emissions  

CISPR 22  

Class B

 

Test  

Specification  

EN55024 

Requirement 

Electro-
static 
Discharge  

EN61000-4-2 

 

+4 kV contact 
+8kV air 

Radiated 
Immunity  

EN61000-4-3 

3 V/m 

Electrical 
Fast 
Transient 
Burst  

EN61000-4-4 

1kV (A/C), .5kV (I/O) 

Surge 

EN61000-4-5 

2kV common mode 
1kV differential mode 

Conducted 
Immunity  

EN61000-4-6 

3V rms 

Magnetic 
Immunity  

EN61000-4-8 

1 A/m Not Applicable 

Voltage 
Dips & 
Interrupts  

EN61000-4-11 

>95%, 30% & >95%

 

Summary of Contents for Edgeport/2





























Reviews: