Inside Out Networks Edgeport/2, Installation Manual

Page: 14 / 28

For Windows 2000 Users
1) Insert the “Edgeport Driver” CD into your CD-ROM drive.
2) Follow the instructions described in “Plugging Edgeport Into Your PC” on page 9.
3) After connecting the USB cable, the Found New Hardware Wizard appears. Click
“
Next ”.
4) Select “ Search for a suitable driver for my device ” and click “ Next ”.
5) Select “ Specify a location ” and click “ Next ”.
6) Type in <CD drive letter>:\Win2k and click “ OK ”.
7) Confirm that Windows is pointing to <CD drive letter>:\Win2k . Then click “ Next ”.
Note: Drivers installed from CD have received “Designed for Windows 2000” certifi-
cation. Drivers downloaded from our web site may be pending certification. If so,
Windows 2000 will display a warning to this effect. Click “
OK ” to continue with driver
installation.
Windows will then finish installing the driver files.
8) Click “ Finish ” to finish the driver installation.
Installation is complete when no more dialogs appear. Your new communication ports,
numbered sequentially following the existing ports in your system, are now ready!
Installing the Printer Port
For Windows 95, 98, CE, SE, ME, 2000, and NT Users
The parallel port on your Edgeport/421 and Edgeport/21 supports only printers. To use
your newly installed printer port:
1) From the Start menu, choose “ Settings ” and then “ Printers .”
2) Right click on the printer you wish to use on your new port and select “ Properties .”
3) In the Details tab, click on the drop down list box under “ Print to the following port ”
and choose “ USBLPT1 ”, then click “OK .”
12