Edgeport Industrial Installation Guide (90000409 Rev. C) – Page 8
Edgeport Driver Installation
For Windows XP
Note: if your computer is connected to the internet, the latest Microsoft certified drivers will be
automatically downloaded from the Microsoft driver update server.
1) You must be logged into an account with administrator privileges.
2) Insert the “Edgeport Driver” CD version 2.80 or above into your CD-ROM drive.
3) When the Found New Hardware Wizard appears click “
Next
,” and the drivers will be
automatically installed from the CD
For Windows 2000
1) You must be logged into an account with administrator privileges
2) Insert the “Edgeport Driver” CD version 2.80 or above into your CD-ROM drive.
3) When the Found New Hardware Wizard appears, select “Install from a list or specific
location (Advanced)” and click “
Next
”.
4) Select “Search for a suitable driver for my device” and click “
Next
”.
5) Select “Specify a location” and click “
Next
”.
6) Type in <CD drive letter>:\Win2k and click “OK”.
7) Confirm that Windows is pointing to
<CD drive letter>:\Win2k
. Then click “
Next
”.
Note: Drivers installed from the CD have received “Designed for Windows 2000” certification.
Drivers downloaded from our web site may be pending certification. If so, Windows 2000 will
display a warning: Digital Signature Not Found. Click “
Yes
” to continue with driver installation.
If you click “
No
” you will need to contact Inside Out Networks Technical Support (512-306-
0600) before installing your USB Plus Series product.
8) Windows will then finish installing the driver files.
9) Click “
Finish
” to complete the driver installation.
Installation is complete when no more dialogs appear. Your new COM port(s), numbered
sequentially following the existing ports in your system, is/are ready.
For Windows 98, and Me
1) Insert the "Edgeport Driver" CD version 2.80 or above into your CD-ROM drive.
2) After connecting the USB cable, the Add New Hardware Wizard appears. Click "
Next
".
3) Select "Search for the best driver for your device" and click "
Next
".
4) Select "Specify a location" and type in
<CD drive letter>:\Win98
. Then click "
Next
".
5) Confirm that Windows is pointing to
<CD drive letter>:\Win98
. Click "
Next
". Windows
will then copy over the driver files.
6) Click "
Finish
" to complete the driver installation.
Installation is complete when no more dialogs appear. Your new COM port(s), numbered
sequentially following the existing ports in your system, is/are ready.
