SKYUS 100BSERIES USER GUIDE
41
USB Serial Sub Tab
IfyouhaveconnectedaUSB/serialportadaptorandaserialportdevicetotheSkyusrouter,youcan
use this page to remotely access the serial port device.
Remote access to USB Serial Port
Check the
Enable Remote Access
box to enable the remote TCP connection to the device’s USB/serial
port. You can use Telnet or a similar application to establish this connection.
NOTE:
You cannot make changes to the following fields unless this box is checked.
Port number:
Specify the desired port to establish the TCP connection.
Connection timeout:
Specify the amount of idle time at which the connection will be automatically
terminated.IfyoudonotwanttheconnectiontobeterminatedbytheSkyusrouter,select
Never
.
Serial port device:
The connected serial port device.
USB Serial Port Settings
Serial port settings should be set to match the connected serial device.
Bits per second:
Specify the rate of data flow. Supported speeds range from 300 bps to 115200 bps.
Data bits:
Select 7 or 8 to match the serial device.
Parity:
Select Odd, Even, or None to match the serial device.
