Inscape Data Link Power LPS2800-T1 Series, User Manual

Page: 4 / 10

Page | 4
Chassis Power Connection
Before connecting or disconnecting ground or power wires to the chassis, ensure that power is
removed from the device. To ensure that all power is OFF, locate the circuit breaker on the
panel board that services the device, switch the circuit breaker to the OFF position, and tape the
switch handle of the circuit breaker in the OFF position.
Work During Lightning Activity
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Comply with Local and National Electrical Codes
Installation of the equipment must comply with local and national electrical codes
Do Not Exceed Input and Output Ratings
Do not operate the product to exceed the power input and output ratings.
This product Conforms to the following safety standards
Specification Description
Regulatory Compliance Products with the CE Marking are compliant with the 89/336/EEC
and 73/23/EEC directives, which include the safety and EMC
standards listed.
Safety UL/CSA 60950
UL 60601-1
IEC 60950 with all country deviations
EN60950
EMC FCC Part 15 Class A
CE Marking
Packing List
Each package includes the following items:

LPS2800AF-T1 or LPS2800AT-T1 (1)

WM0001 Wall Mounting Kit (1)

AC Power Cable with one 3-PIN AC Power Connector (1)

DC Power Cable with one 4-PIN DC Power Connector (1)

User Manual (1)

Warranty Sheet (1)