Page | 7
Product Description
LPS2400 Outdoor Industrial PoE Switch features with four PoE Ethernet ports and comply to
10/100/1000BaseT(X), IEEE802.3af PoE and two Gigabit SFP fiber optics interfaces. The power supply of
single PoE port can be up to 15.4W. The transfer data can be up to 120Km from SFP fiber port to a
control center. Additionally, the product also features with an anti-electromagnetic interference that
is designed for harsh outdoor applications and the 3KV network port surge protection can adapt to harsh
outdoor environment and ensure the reliability of the uninterrupted PoE operations. The outdoor
enclosure is rated at IP68, and the system is able to operate under -
40 ~ +75 ˚ C
temperature range.
Product Features
1.
Comply to IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1D, IEEE
802.3at, IEEE 802.3af, IEEE 802.1Q IEEE 802.1p, IEEE 802.1x, IEEE 802.1W, SNMP, IGMP
standards
2.
10/ 100/ 1000M self-sensing RJ45 port, support PoE power supply function; All ports support
auto-flip (Auto MDI/MDIX);
3.
Each PoE port can provide power up to 15.4W p er IEEE 802.3af standard; Supply power for
powered devices compatible with IEEE802.3af;
4.
Support IEEE802.3x full duplex flow control and duplex backpressure flow control;
5.
8.8G backplane bandwidth;
6.
1K MAC address table;
7.
Its 3KV network port surge protection can adapt to harsh outdoor environment; Under the
temperature of -40 ~ +75
˚
C, working at a full load 240W;
8.
The 2 gigabit SFP fiber ports are capable of high bandwidth and for up to 120KM long distance
transmission.
Installation
a.
Before installation, please ensure the following:
b.
All PD devices, i.e., PoE Clients, meet the power requirement of the connecting devices.
c.
All PD devices, i.e., PoE Clients, match with the power receiving device power pinout
specification (1/2+ & 3/6-)
d.
Connect the power cable to a power source, 110 ~ 240V AC, 48V DC is optional and can be used a
backup power. Then, the switch will automatically initialize, and LED lights status will display as
following:
i.
Except the POE port lights, all the other lights w
ill go through the process of “on
-off-on-
off”, which means the installation is successful.
ii.
Power LED remains ON
e.
As desired, you can connect to a 48V DC power source with the included 4 -Pin DC
Connector to the DC Input Connector simultaneously with the AC Input. When connected,
the DC Input operates as a backup power
f.
Connect the network devices with network cables to the POE switch port though the waterproof
connectors, then secure the Top Cover with the four screws to the Bottom Case
g.
After the Ethernet and/or fiber optics network devices are connected, please refer the LED
Indicator Description Table Below on Page 7
Summary of Contents for Link Power LPS2400
Page 12: ...Page 12...
