NVS440R User’s Guide
-
-
-
- 12
12
12
12 -
-
-
-
Cable modem you will need supplementary information provided by your ISP.
3. Connect to NVS440R in Administrator Mode for initial parameter set-up.
All parameters are set to factory default state when NVS440R is delivered to you. Detailed
information of using administration mode can be found in section 5
[
5.
Configuring the A/V Server in
Administrative Mode]
. The parameters in the following table should be set-up with proper values.
Detailed information for the parameters in Administrator Mode can also be found in section 5
[
5.
Configuring the A/V Server in Administrative Mode]
NOTE:
The set-up values are preserved even the power is turned off.
Reference
Parameter
Setup value
Factory default value
Section 5.2
Max Upload
Bandwidth
Set this value lower than allowed
upload bandwidth.
10Mbps
Section 5.2
Max Users
Number of users allowed to
share video
10users
Section 5.4
Administrator name &
password
For security reasons, you are
recommended to change these
values from factory default
settings. Please note these
new values in a secure place.
Username : root
Password : dw2001
Section 5.4
Current Time
Input correct time in this field.
2001/1/1
4. Connect audio/video sources and output devices to the NVS440R accordingly.
NOTE:
NVS440R may not function properly if there is no video and audio input. Please reference to
the following table for proper functional setup. You have to connect at least one Video source.
Connectors
Function
Signal description
Number
Video In
Input video
connector
Analog video outputs from analog
CCTV camera, DVD, TV etc.,
(NTSC/PAL/SECAM)
1 to 4
Line In/Mic
Audio in
Microphone or output from audio devices.
1 to 4
Line Out
Audio out for
speaker
When in bi-directional audio mode, Audio
signal from remote site is available from this
connector. Use speaker with amplifier.
1
