LIMIT/ key to recall the current settings. Pressing FUNC/C key when the current
limits are shown to clear the settings, then pressing the ZERO/ENTER key to store the
zero values.
ACCUMULATED TOTAL
The scale can be set to accumulate automatically when a weight is added to the scale
or manually by pressing the PRINT key. See the PARAMETERS Section for details of
selecting the method. The accumulation function is only available when weighing. It is
disabled during percent weighing or parts counting.
MANUAL ACCUMULATION
When the scale is set to manual accumulation the weight displayed will be stored in
memory when the PRINT key is pressed and the weight is stable.
The display will show "ACC 1" and then the total in memory for 2 seconds before
returning to normal. If the optional RS-232 interface is installed the weight will be
output to a printer or PC.
Remove the weight, allowing the scale to return to zero and put a second weight on.
Press PRINT, the display will show "ACC 2" and then show the new total.
Continue until all weights have been added.
To view the totals in memory press the PRINT key when the scale is at zero. The
display will show the total number of items "ACC xx" and the total weight before
returning to zero. The totals will also be printed via the RS-232 interface.
To erase the memory press PRINT to view the totals and then press the FUNC/C key to
clear the memory.
AUTOMATIC ACCUMULATION
When the scale has been set to Automatic Accumulation the value is stored in memory
automatically.
Add a weight to the scale, the beeper will sound when the scale is stable to signify the
value is accepted. Remove the weight.
The display will show "ACC 1" and the totals in memory when the scale returns to zero.
Adding a second weight will repeat the process.
