Sep
4, 2007 (Rev 2.1s)
24/26
TB-5V-LX110/220/330-DDR2Hardware User Guide Rev2.1s
FPGA Configuration
The following 1) ~ 4) are descriptions of FPGA configuration.
1) Set JP1 “BPI UP” mode.
*Note: JP2, 6, 7, 8, 9, 10 are jumpers for power supply setting of I/O Banks. (Page.9)
Figure.59 BPI UP Mode Setting
2) Set SW3 as Figure.60 and power on the board.
Figure.60 Setting of SW3 (When FPGA Configuration)
1
2
ON
OFF
SW3 Silk
