13
Advanced Operation
6.2 DVR HDD Information
Move cursor to “DVR HDD Information” and press [OK] button to display information of disk.
6.3 HDD Format
Move cursor to “HDD Format” and press [OK] button to enter in its setup interface to format disk.
6.4 DVR Configuration
Move cursor to “DVR Configuration” and press [OK] button to enter in its setup interface.
Time Shift: ON/FF
Time shift to Record : ON/OFF
Record Type: TS/PS
Record Selection
Tips for record real-time channel program.
Connect USB device with receiver.
Turn on “Time Shift” mode.
Press [PAUSE] button to stop the TV program and the receiver will start recording as much as
the USB device capacity is. Press [PLAY] button to continue watch the program from the
stopped.
Use [F.REW] and [F.FWD] buttons to forward or backward of recorded program. There are 5
options, 2
、
×4
、
×8
、
×16 and ×32.
Press [INFO] button twice to enter in “HDD Record List” interface, choose one of it and press
[OK] button to watching by full screen.
The recorded program will be eased automatically once channel has been shifted.
Tips for record video
Connect USB device with receiver.
Press [REC] button to start recording program.
Press [STOP] button to stop recording.
The receiver will start recording as much as the USB device capacity is.
Recorded video will be stored in the disk.
Difference between “Timeshift” mode and “REC” mode
Timeshift mode is only used to record real-time channel program.
In Timeshift mode, the program will be stopped while watching. In REC mode, you can watch and
record at the same time.
Record in Timeshift mode will be eased once channel has been shifted. Record in REC mode will be
stored in USB drive.
6.5 Jump
Move cursor to “Jump” and press [OK] button to enter in its setup interface. There are 5 options
which are listed below.
30sec
1min
5min
10min
30min
Notes
“Jump” function is only activated to non-real-time program. Use [VOL◄/►], [PREV] and [NEXT]
buttons to operate.
While using [VOL◄/►] button:
The screen will jump to the time as set, requiring [OK] button to confirm the jump.
While using [PREV] and [NEXT] button:
The screen will jump to the time as set directly.
