Inpax X-2010 CA, User Manual

Page: 11 / 16

11
Advanced Operation
 Aspect Ratio: Auto/4:3 LB /4:3 PS/ 16:9
 Video Output: YUV/RGB
 Digital Audio Output: BS OUT/LPCM OUT
3.3 Local Time Setting

Region: UK, France, Germany, Spain and etc.
 GMT Usage: OFF/User Define/By Region.
 GMT Offset: GMT+12:00~GMT-11:30.
 Date: Enter in its setup interface, use [VOL◄/►] button to move the cursor and numeric buttons to
input. Press [OK] button to confirm imputation.

Summer Time: ON/OFF
 Time: Enter in its setup interface, use [VOL◄/►] button to move the cursor and use numeric
buttons to input. Press [OK] button to confirm imputation.
Notes
1. “GMT Offset” is only activated in “User Define” mode.
2. “Summer Time” is only activated in “By Region” mode.
3. “Date” and “Time” is only activated when “GMT Usage” in “OFF” mode.
3.4 Timer Setting
 Timer Mode: OFF/Once/Daily/Weekly/Monthly

Timer Service: Channel/Record. (It’s deactivated when timer mode is off.)

Wakeup Channel: The system will start automatically once the Timer Mode is activated.
 Wakeup Date: Set up time to wakeup. Use navigation buttons and numeric buttons to set up date.
 Wakeup Time Set up time to wakeup. Use navigation buttons and numeric buttons to set up time.
 Duration: Set up the length of an alarm. Use navigation buttons and numeric buttons to set up time.
Note: Wakeup function is deactivated when LED power indicator goes green.
3.5 Parental Lock
Default password is “0000”.
 Menu Lock: OFF/ON
Password will be required for all levels of menu if the menu lock is ON.

Channel Lock: OFF/ON
Password will be required for locked channels.
 New Password
 Confirm Password
Use numeric buttons to set up password.
3.6 OSD Setting

OSD Time out: 1-10 seconds.
 OSD Transparency: OFF/10%/20%/30%/40%.
 Load Default OSD Setting
3.7 Favorite
Totally 8 groups for optional.
Choose “1 Fav group 1” and press [OK] button to rename it. Use navigations button to input
according to screen.
3.8 Auto Standby

OFF/ON
4. Tools
Move cursor to “Tools” and press [OK] button to enter in its submenu. There are 5 options which are
listed below.

Information

Load Factory Setting

Upgrade By USB

USB Device
 Remove USB device safely
4.1 Information
Move cursor to “Information” and press [OK] button to display information of the device.
4.2 Load Factory Default
Move cursor to “Load Factory Default” and press [OK] button to load factory default. The default
password is “0000”.This step must be done at first time use or after upgrade. Please operate according
to screen.