4 Safety
ED.
2009/11
NEVER touch the valve and/or pipes in contact with the liquid during operation; there is a risk of
burns if it operates with hot products.
Do not operate the handlever in case of failure; the springs are not protected.
The valve/actuator contains rotating parts. Do not place the fingers or hands in the coupling
between the valve and the actuator when the compressed air is connected; this may cause serious
injuries.
1.4.3.
During maintenance
The
Technical Specifications
of Chapter 8 should always be observed.
NEVER disassemble the valve until the pipes have been emptied. Bear in mind that the liquid in the
pipe may be dangerous or extremely hot. Consult the regulations in effect in each country for these
cases.
Do not leave parts loose on the floor.
All the electric work should be carried out by authorised personnel.
1.4.4.
In compliance with the instructions.
Any nonfulfillment of the instructions may result in a risk for the operators, the environment and the machine, and may result in
the loss of rights to make claims.
This nonfulfillment may result in the following risks:
•
Failure of important functions of the machines/plant.
•
Failure in specific maintenance and repair procedures.
•
Possibility of electric, mechanical and chemical risks.
•
Will place the environment in danger due to the release of substances.
1.5.
GUARANTEE.
Any guarantee will be cancelled immediately and as a matter of law and, in addition, we will require compensation for any
claims of civil liability presented by third parties, in case:
•
The installation and maintenance work has not been carried out according to the instructions of this manual.
•
The repairs are not carried out by our personnel or have been carried out without our written authorisation.
•
The parts used are not INOXPA genuine parts.
•
Modifications have been carried out on our materials without written authorisation.
•
The material has been badly used, incorrectly used, or used with negligence or has not been used according to the
indications and intended use specified in this manual.
The general conditions of delivery already in your possession are also applicable.
Please do not hesitate to contact us in case of doubts or more complete explanations are required on specific data
(adjustments, assembly, disassembly, etc.).
www.sks-online.com
www.sks-webshop.com
