Installation
INOXPA S.A.U.
10.250.30.02EN · (0) 2019/09
7
5. Installation
5.1. RECEPTION OF THE VALVE
INOXPA is not liable for any deterioration of the material caused by its transport or unpacking.
Visually check that the packaging has not been damaged.
When receipt the valve, check to see whether all the parts listed on the delivery slip are present:
complete valve,
its components, if any are supplied,
delivery slip,
instruction manual.
INOXPA inspects all its equipment before packaging. However, it cannot guarantee that the merchandise
arrives to the user intact.
When receipt the valve:
remove any possible traces of packaging from the valve or its parts,
inspect the valve or the parts that comprise it for possible damage incurred during shipping,
take all possible precautions against damage to the valve and its components.
5.2. TRANSPORT AND STORAGE
The buyer or user shall be liable for assembly, installation, start-up and operation of the valve.
Take all possible precautions when transport and storage the valve to avoid damage it and its components.
5.3. IDENTIFICATION OF THE VALVE
Each valve is inscribed with its fabrication number. Indicate de fabrication number on all documents to refer to
the valve.
Fabrication number
1
0
.2
5
0
.3
2
.0
0
2
6
