4. General Information
The C-TOP Reed is a control head that adapts to all of the INOXPA actuators to automate pneumatic
drive process valves.
The control head contains up to a maximum of three solenoid valves, two magnetic targets fix to
the adapter shaft and an electronic module formed by three sensors connected to three visual
indicators. (LEDs). Through external signals, the solenoid valves which control and act on the valve
are activated. At the same time, the electronic module sensors can read the position of the valve
actuator through the detection of the position of the targets located on the adapter shaft and they
inform of the valve state with the illuminate of the control head. The control head includes DIP
switches that allow obtaining different configurations of the output signals to adapt the control head
to the different types of valves.
During the start-up of the control head, the targets will be positioned manually on the adapter shaft
(type of the adapter shaft according to the valve) for the sensors could detect them correctly.
4.1. DESCRIPTION
4.2. APPLICATION
The C-TOP Reed can install on any process valve (butterfly, ball and single or double seat valves) of
the food, beverage, chemical or pharmaceutical industry.
10.427.32.0004
Cover screws
Cover seal
Cover
Base screws
Solenoid valves
Electronic module
Cable gland
Base
Base seal
Pneumatic ports
Magnetic targets
General Information
INOXPA S.A.U.
10.427.30.01EN · (0) 2022/06
8
