2. Generalities
2.1. INSTRUCTIONS MANUAL
This manual contains information about the reception, installation, operation, assembly and mainte-
nance of the control head C-TOP Reed.
Carefully read the instruction before starting the control head, familiarize yourself with the installation,
operation and correct use of the control head and strictly follow the instructions. These instructions
should be kept in a safe location near the installation area.
The information published in the instruction manual is based on updated data.
INOXPA reserves the right to modify this instruction manual without prior notice.
2.2. COMPLIANCE WITH THE INSTRUCTIONS
Not following the instructions may impose a risk for the operators, the environment and the machine,
and may cause the loss of the right to claim damages.
This non-compliance may cause the following risks:
- failure of important machine/plant functions,
-
failure of specific maintenance and repair procedures,
- possible electrical, mechanical and chemical hazards,
- the risk to the environment due to the type of substances released.
2.3. WARRANTY
The conditions of the warranty are specified in the General Sales Condition that has been delivered
at the time of placing your order.
The machine may not undergo any modification without prior approval from the
manufacturer.
For your safety, only use original spare parts and accessories. The usage of other parts
will relieve the manufacturer of any liability.
Changing the service conditions can only be carried out with prior written authorization
from INOXPA.
Please do not hesitate to contact us in case of doubts or if further explanations are required regarding
specific data (adjustments, assembly, disassembly, etc.).
Generalities
5
INOXPA S.A.U.
10.427.30.01EN · (0) 2022/06
