Vs
Ground
Output 1
Output 2
Output 3
Caution: Incorrect
connections may
cause damage to the
unit
Output 4
Fault
Figure 9
EN4204 Terminals
5 Warranty/Disclaimer
Caution:
Changes or modifications to this unit not expressly approved by
Inovonics Wireless Corporation may void the installer's authority to operate
the equipment as well as the product warranty.
Inovonics Wireless Corporation ("Inovonics") warrants its products
("Product" or "Products") to conform to its own specifications and to be free
of defects in materials and workmanship under normal use for a period of
thirty-six (36) months from the date of manufacture. Within the warranty
period, Inovonics will repair or replace, at its option, all or any part of the
warranted Product. Inovonics will not be responsible for dismantling and/or
reinstallation charges. To exercise the warranty, the User ("User", "Installer"
or "Consumer") must work directly through their authorized distributor who
will be given a Return Material Authorization ("RMA") number by Inovonics.
Details of shipment will be arranged directly through the authorized
distributor.
This warranty is void in cases of improper installation, misuse, failure to
follow installation and operating instructions, alteration, accident or
tampering, and repair by anyone other than Inovonics.
This warranty is exclusive and expressly in lieu of all other warranties,
obligations or liabilities, whether written, oral, express, or implied. There is
no warranty by Inovonics that Inovonics product will be merchantable or fit
Jam
out
put
Ja
m
outpu
t
Ta
m
per
out
put
Tamper
out
put
Reset in
put
Res
e
t input
for any particular purpose, nor is there any other warranty, expressed or
implied, except as such is expressly set forth herein. In no event shall
Vs
Inovonics be liable for an incidental, consequential, indirect, special, or
Ground
exemplary damages, including but not limited to loss of profit, revenue, or
NC
contract, loss of use, cost of down time, or interruption of business, nor any
COM
claim made by distributor's customers or any other person or entity.
This warranty will not be modified or extended. Inovonics does not
authorize any person to act on its behalf to modify or extend this warranty.
NO
Caution: Incorrect
connections may
This warranty will apply only to Inovonics Products. Inovonics will not be
cause damage to the
liable for any direct, incidental, or consequential damage or loss
unit
whatsoever, caused by the malfunction of Product due to products,
NC
accessories, or attachments of other manufacturers, including batteries,
COM
used in conjunction with Inovonics Products.
NO
NC
NC
CO
M
NO
NC
CO
M
NO
Note:
E-mail [email protected] for a copy of the CE Declaration of
Conformity.
COM
NO
Figure 10
EN4204R Terminals
3.1 Mount the Receiver
Caution:
Mount the receiver in a location removed from metal. Metal
objects (duct work, wire mesh screens, boxes) will reduce RF range.
1.
Use the provided anchors and screws to mount the receiver in a
location accessible for future maintenance.
2.
Perform a walk test, activating each transmitter assigned to the receiver
and ensuring an appopriate response.
4 Specifications
Housing:
6.38" x 3.60" x 1.10" (162 mm x 92 mm x 28 mm)
Operating environment:
32°- 140°F (0°- 60°C), 90% relative humidity,
non-condensing
Power requirement:
11 - 14 VDC; 150 mA (EN4204), ~400 mA max
(EN4204R with all five relays energized)
Current consumption:
Approx. 135 mA; approx. ~400 mA max (EN4204R
with all five relays energized)
Output specifications:
Open collector, drive down to .4V @ 100 mA
(EN4204); Form C relay 1A @ 28 VDC, 0.5A @ 30 VAC resistive load
(EN4204R); N/O receiver case tamper contact closure, N/C receiver jam
output indication.
Input specifications:
A low is less than .5 V; a high is greater than 2.5 V.
Reset input: Contact closure, momentary low.
Receiver type:
Frequency hopping spread spectrum
Number of points/transmitters:
Four
Number of alarm outputs:
EN4204: four open collector outputs;
EN4204R: four Form C relay outputs
Number of fault outputs:
EN4204: one open collector output; EN4204R:
one Form C relay outputs
Tamper
GND
GND
Reset
GND
Jam
Figure 11
Tamper, Reset and Jam Circuits
© Inovonics, 2009 - www.inovonics.com
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
3
