Page 2 of 4
October 2013 Rev 1
7
8
9
10
1
2
Page 1: ...reserved GJD1030 D TECT Inovonics Enabled Wireless Installation Manual The D TECT Inovonics MUST be learnt to the control panel receiver BEFORE it is mounted in its final location Please see page 4 of...
Page 2: ...Page 2 of 4 October 2013 Rev 1 7 8 9 10 1 2...
Page 3: ...silicone based sealants Silicone sealants must not be used as vapours may corrode the electronics and metal parts Note The Inovonics transmitter is supplied with the ES link disabled If this is requir...
Page 4: ...enter the walk test mode press the programming button once The unit can now be aligned Walk test mode ends automatically five minutes after the last detection Do not conduct walk tests with the cover...
