— —
34
PARTS LIST
EXPLANATION OF PARTS LISTINGS
This section contains listings of component parts used in the Inovonics
708 FM-Stereo Generator. These are listed either
en-masse,
or by
schematic component reference designation, and may, or may not,
specify a particular manufacturer. When no manufacturer is called-out,
the term “open mfgr.” advises that any manufacturer’s product is
acceptable.
If a particular component is not listed at all, this means that we do not
consider it a typical replacement item. Should you need to order an
unlisted part, call, write or FAX the factory with a brief description and
we’ll do our best to figure out what you need and get it on its way to
you.
PARTS LISTING
Unless specifically noted by component reference designation below,
capacitors
are specified as follows:
a)
Under 100pF
are “dipped mica” type, DM-15 (or CM-05 military
series) size designation; “P” value is picofarads, ±5%, 200VDC;
(open mfgr.).
b)
100pF to 0.47µF
are of the metalized mylar or polyester variety;
whole number “P” values are picofarads, decimal values are
microfarads, ±5%, 50VDC or better. The style used in the 708 is the
“minibox” package with lead spacing of 0.2 inch.
Preferred mfgr.:
Wima MKS-2 or FKC-2 series.
Alternates:
CSF-Thompson IRD
series or Roederstein KT-1808 or KT-1817 series.
c)
1.0µF and above
are radial-lead electrolytics, value per schematic,
25VDC; (open mfgr.).
C1,2
Capacitor, Ceramic Disc “Safety” Mains Bypass, .0047µF, 440VAC;
Murata/Erie DE7150 F 472M VA1-KC (preferred)
C5,6
Capacitor, Electrolytic, axial leads, 1000µF, 35VDC; (open mfgr.)
C31
Capacitor, Monolithic Ceramic, 0.1µF, 50VDC; (open mfgr.)
C34
Capacitor, Variable, 5-50pF; Mouser 24AA024
C39-43,48-51,
54-57,59-61,
67,78
Capacitor, “High-Q,” .0033µF, 2.5%, 100VDC; Wima FKC-2
(Polycarbonate) preferred, any equivalent
must
have identical
characteristics.
CR1-5,11
Diode, Silicon Rectifier; (open mfgr.) 1N4005
CR6-9,12-27
Diode, Silicon Signal; (open mfgr.) 1N4151 or equiv.