User’s Manual -
RNC-1004WL Wireless Router - www.inovia.co.kr
Gateway：(default) In this mode, the device is supposed to
connect to internet via ADSL/Cable Modem. The NAT is enabled
and PCs in LAN ports share the same IP to ISP through WAN port.
The connection type can be setup in WAN page by using PPPOE,
DHCP client, PPTP client or static IP.
Bridge: In this mode, all Ethernet ports and wireless interface
are bridged together and NAT function is disabled. All the WAN
related function and firewall are not supported.
Wireless ISP: In this mode, all Ethernet ports are bridged
together and the wireless client will connect to ISP access point.
The NAT is enabled and PCs in Ethernet ports share the same IP
to ISP through wireless LAN. You must set the wireless to client
mode first and connect to the ISP AP in Site-Survey page. The
connection type can be setup in WAN page by using PPPOE,
DHCP client, PPTP client or static IP.
4.9.2 Time Zone Setting
You can maintain the system time by synchronizing with a
public time server over the Internet.
Current time: type the date and time.
Time Zone Select: Select your local time zone from this pull down
list.
Enable NTP client update: Select it, you can get the time from
NTP.
NTP server: Select a server from list.
Click the [Apply] Changes get the time from Internet if you have
connected to Internet.
29