As weather conditions cannot be 100% correctly forecasted, we cannot be responsible for any loss caused by an
incorrect forecast.
SUNNY PARTLY CLOUDY CLOUDY RAINY STORMY
To obtain an accurate weather forecast & barometric pressure reading, you need to input your current local sea
level pressure. After battery/adapter installation, it will enter sea level pressure setting directly and the pressure
reading will flash. Press “
▲
” or “
▼
” to set the value and press “PRESSURE” to confirm and exit.
You can also hold “PRESSURE” button to enter sea level pressure setting in normal display mode. Press “
▲
” or
“
▼
” to set the value and press “PRESSURE” to confirm and exit.
Press PRESSURE button to select pressure unit between hPa, inHg & mb.
Note
: you may obtain your current local sea level pressure information from the weather web site.
5/ IN/OUT TEMPERATURE & HUMIDITY
Temperature & humidity readings are shown on the upper right of the display.
Press “CHANNEL/SEARCH” repeatedly to select indoor, Ch1, Ch2, Ch3 or auto-channel scrolling
display
modes.
Note: The outdoor temperature & humidity sensor is built inside the anemometer and is assigned to channel 1.
Additional remote thermo-hygrometer sensor(s) can be purchased separately and they should be assigned to
Ch-2 or 3 only.
6/ ICE ALERT
Ice alert indicator
appears on the display next to the wind chill reading when outdoor channel-1 temperature
falls to or below 4C (or 39.2F). It provides an early alert for possible icy road condition to driver.
7/ IN/OUT HEAT INDEX
Heat Index combines the effects of heat and humidity. It is the apparent temperature of how hot the heat-humidity
combination makes it feels.
Press “Heat Index/Dew Point” button once to show the respective indoor or outdoor heat index on the display.
“HEAT INDEX” icon will appear.
Note: Heat index display range: 14C to 60C
(It shows LLL when heat index is below 14C or HHH when above 60C)
8/ IN/OUT DEW POINT
Dew point is the saturation point of the air, or the temperature to which the air has to be cooled in order to get
condensation.
Press HEAT INDEX / DEW POINT button twice to show the respective indoor or outdoor dew point reading on the
display. “DEW POINT” icon will appear.
Note: Dew point display range: 0C to 60C
(It shows LLL when dew point is below 0C and HHH when above 60C)
9/ DAILY, WEEKLY, MONTHLY & ACCUMLATED RAINFALL
The wireless rain gauge provides daily, weekly, monthly and accumulated rainfall measurements.
Press “RAIN/CLEAR” repeatedly to switch between the different modes and the corresponding “DAILY”,
“WEEKLY”, “MONTHLY” or “TOTAL” icon will appear indicating your current display mode.
In daily, weekly or monthly rainfall display, hold “RAIN/CLEAR” to clear all daily, weekly & monthly rainfall reading
to zero. In total rainfall display, hold “RAIN/CLEAR” to clear total rainfall reading.
10/ RAINFALL HISTORY
This unit has a large capacity memory that can store and display:
- Daily rainfall (up to last six days as well as current day)
- Weekly rainfall (up to last six weeks as well as current week)
- Monthly rainfall (up to last six months as well as current month)
Summary of Contents for SM55PRO
Page 12: ......
