Inovalley SM55PRO, Owner'S Manual

Page: 1 / 12

PROFESSIONAL WEATHER STATION
Ref.: SM55PRO
- Owner’s Manual -
Thank you for purchasing the new generation of professional weather station. Designed and engineered with the
state-of-art technology and components, this instrument will provide accurate and reliable measurement of wind
speed & direction, wind chill, daily/weekly/monthly/accumulated rainfall, barometric pressure, weather forecast,
indoor/outdoor humidity, temperature, heat index & dew point as well as radio-controlled alarm clock. Read this
manual carefully to fully explore the features and functions of the new product.
In this package you will find:
- 1 monitor (Receiver)
- 1 anemometer (Transmitter – transmit wind & outdoor Channel-1 temperature/humidity data)
- 1 rain gauge (Transmitter – transmit rainfall data)
- Mounting hardware for rain gauge (2 sets of screws & plastic screw plugs)
- Mounting hardware for anemometer (2 pieces of U-shape metal plate, 4 sets of Hex screws & nuts)
- 1 owner’s’ manual
- 3 pieces AAA batteries for monitor (included)
- 2 x 2 pieces AA for anem rain gauge (included)
- 1 6.0V adapter (included)
Additional tools needed for installation:
- Small screwdriver
- Hexagonal Key
- Electric drill
- Pencil
- Level
- Mast, 1 – 1.25 inch (2.54 – 3.18 cm) in diameter (to mount the anemometer)
1/ INSTALLATION
The weather station operates at 433MHz and does not require wire installation among the component parts. To
ensure successful installation and the best performance, we recommend you follow the installation instructions in
the order they appear in this manual.
1. Battery & adapter installation for the monitor (receiver)
Main Power source: Plug in the adapter jack into the back side of the unit for basic operation and continuous
backlight.
Backup Power: Open the battery door and insert 3 pieces of AAA batteries according to the polarity indicated,
close the battery cover.
Sea level pressure setting
After battery/adapter installation, the monitor will enter sea level pressure setting mode directly and the pressure
reading will flash. Press “
▲ ” or “ ▼ ” to set the sea level pressure value. Press “PRESSURE” to confirm the setting
and exit. This allows the unit to provide a more accurate weather forecast & pressure reading.
You can also set the sea level pressure any time after the installation is completed. For more information, see
“WEATHER FORECAST & BAROMETRIC PRESSURE” section.
Note
: you may obtain the current sea level pressure from the weather web site for your locate area.
ENGLISH