RV40 - Instruction Book
Page 12
4/ Operating Instructions
a/ Alarm Function:
●
Press ALM to switch to alarm mode in the normal time interface, the initial value is
PM 12:00, and alarm is in the off state, shown as the following figure:
●
Press UP to open/close alarm function in the alarm interface, and the alarm icon
is displayed during opening alarm function, shows as the following figure:
●
In the alarm interface, press ALM for 2s to enter set state; press UP to adjust
hour-minute and press ALM again to exit set state and confirm the current setting
value.
●
In the alarm mode, it backs automatically to the normal time interface if there is
without pressing for 30s.
●
Alarm time is 30s, and the alarm icon displays blinkingly during alarming, shown
as the following figure:
Summary of Contents for RV40
Page 16: ...RV40 Instruction Book Page 16...
