Inova inovabed Sofa-WallBed, Assembly Manual

Page: 30 / 37

Step 13: Mechanize The Bed Platform
The illustrations drawn are general representations of your product’s parts and hardware
.
A. Insert the H-738 bolts into hole #1 on the Left and Right Side Rails. Then attach the H-086 nuts to the ends of bolts, but DO NOT fully tighten.
Insert the H-739 low head cap screw into hole #3 on the Left and Right Side Rails. Then attach the H-086 nuts as shown and fully tighten.
B. Stand the Bed Platform up, resting the Headrail on the floor. With one person holding the Bed Platform in place, attach the M-50a cheek plates to the Side Rails with H-924 machine screws as show.
( Left Cheek Plate to Left Side Rail, Right Cheek Plate to Right Side Rail)
C. Install the Pull Handles as shown.
A.
B.
C.
H-086
H-739
H-738
Hole 1
Inside
Inside
Outside
Outside
Right Side Rail shown.
Hole 3
M-50a (Right)
Do not fully tighten yet. Apply tape to the nut on
the inside to keep bolt head away from Side Rail.
H-924
Pulls
TWO PERSON LIFT!