Inova inovabed Sofa-WallBed, Assembly Manual

Page: 12 / 37

Tech support is readily available if needed
Email: support@inovabed.com
Phone: 866.528.2804
Sofa-WallBed
| ASSEMBLY MANUAL
PLEASENOTE: Your Bed may look different
than what is shown in the pictures and
Videos throughout this manual
TROUBLESHOOTING
HOW CAN I ACCESS
BEHIND THE SOFA-WALLBED?
If you need to access to the area behind the
Bed,you most likely do not have to remove it
from the wall. The Headboard does release,
allowing access behind the Bed.
TO LOWER THE HEADBOARD:
Simply pull the upper lip of the Headboard away
from the shelf. This will require a bit of force to
do because of the button fix clips used to keep
the Headboard in place.
REMOVING BED FROM WALL:
With another person,“walk” each side of the Bed
Cabinet away from wall.
TIP: You may want to place moving pads
underneath the Bed Cabinet (with another
person, tip the Bed Cabinet slightly to place
pad).
MY SOFA-WALLBED IS MAKING A
CREAKING NOISE
If any of the hinges or other parts of the
mechanism on Sofa-WallBed creak, spray
them with a dry silicone-type lubricant,
available at most hardware stores. Although
this type of lubricant should not damage the
wood panels,be careful not get any on the bed
covers or mattress.
I CAN’T RAISE OR LOWER THE BED
PLATFORM
If there is any binding or difficulty raising or
lowering the bed,it is possible that a foreign
object has become lodged in the sofa
mechanism. Remove the seat cushions, and
look between the sofa arm and sofa seat for any
obstructions. If there is no obvious culprit,call
Inova customer service for assistance in
troubleshooting the issue.