Inova OnTime Digital Clock Owner's Manual
All claims based on information publicly available at time of printing. All other product or service names mentioned in this document may be
trademarks of the companies with which they are associated.
© 2007 Inova Solutions. | All rights reserved. 6.12.2007 | page 18
Configuring Daylight Saving Time
The following table identifies the process for setting daylight saving time.
No Daylight Saving Time
Type the command to disable DST:
dst –none
Press the Enter key.
In the U.S. and Canada
Type:
dst -rule -1 8 2 2 1 1 10 2
Press the Enter key.
Note:
dst –raw
will work in all clock versions.
dst -rule
works
with Versions 1.1 or 1.2.
For European Daylight Saving
Time
Type:
dst -rule 1 -1 2 1 1 -1 9 1
Press the Enter key.
Other locations
The support web site at
www.buyinova.com
contains a DST
calculator which can compute the correct DST configurations
string for you location. Obtain the correct string and enter it
with the
dst –rule
command.
Table 5: Configurations for Daylight Saving Time
Three additional time related configuration items should also be set initially. The
commands for setting 12/24, AM/PM, and Colons On/Off are identified below.
Configuring 12/24 Time Format
display –t 24
Sets 24 hour display. Note the space before and after –t.
display –t 12
Sets 12 hour display. Note the space before and after –t.
Configuring AM/PM Indicator
display –p off
Turns off pm indicator. Note the space before and after –p.
Display –p on
Turns on pm indicator. Note the space before and after –p.
Configuring Colons On/Off
display –c off
Turns off colons. Note the space before and after –c.
display –c on
Turns on colons. Note the space before and after –c.
