Page 18
Page 19
EN
EN
Chapter 4 Assembly and function
Chapter 5 Transport and storage
4.8.7 Drive unit (item no. 10039958)
2
3
1
4
5
8
7
6
9
Motor
Item Item no.
Installation
quantity
UQ
Name
1
10007515
1
Units
Gear motor, 1.1 kW
2
10039953
1
Units
Complete motor flange (incl. items 7, 8, 9 and 10)
-
10039955
1
Units
Motor flange without attachments
3
10041323
1
Units
CEE plug 3 x 16 A, IP 44
4
10039956
1
Units
Tappet bracket with paddles
4.1
10039933
1
Units
Radial shaft seal
5
10016644
1
Units
Bow handle
6
10039944
2
Units
Centring bolt
7
10039945
2
Units
Eccentric bushes
8
10039954
1
Units
Clamping lever for quick-release fastener
9
10041184
1
Units
Motor flange seal
NOTE
Use the order form at the end of this operating manual to order spare parts.
5 Transport and storage
5.1 Safety notices for transport
!
DANGER
Slipping machine
Danger of death for drivers and transport users.
• Ensure that the machine is in a secure position during
transport.
• Secure the machine against slipping.
!
WARNING
Risk of injury posed by carrying or lifting
machine
• The machine weighs 58 kg. To prevent overloading and
damaging the spine, at least 2 people must lift or carry
the machine.
5.2 Transport inspection
NOTE
Check the machine to ensure that all
components are present and for transport damage
immediately upon receipt.
• Do not leave any parts in the packaging.
5.3 Damage report
Proceed as follows in the event of externally visible
transport damage:
1. Write a damage report with the following details:
- Your client address
- Name of the transport company and the driver
- Date and time of the delivery
- Order number and machine name
according to the delivery note
- Description of the damage
- Signature of the driver
- Signature of the recipient at the customer’s premises
2. Have the transport damage confirmed by means of the
driver’s signature.
3. Send one copy of the damage report to
the transport company and another to
Inotec GmbH.
4. And clarify the possible ways in which the damage
could be remedied with one of our service centres (see
second last page)
5.4 Complaints
Claims for compensation relating to transport damage can
only be made if the delivery company is informed of the
same without undue delay.
5.5 Packaging
The new machine will be shipped cellophane-wrapped on
a Euro pallet.
• Dispose of the packaging material as required by law.
5.6 Transport of the used machine in vehicle
!
DANGER
Slipping machine.
Danger of death for drivers and transport users.
1. Ensure that the machine is stored securely during trans-
port.
2. Secure the machine against slipping.
NOTE
Leaking material residue
• Clean the machine before transport.
• Secure the machine in the vehicle using suitable fixing
materials.
5.7 Storage
If the machine is not likely to be used for an extended
period of time, thorough cleaning will be required.
Store the machine under the following environmental
conditions:
• Dry
• Frost-free
• Protected from dust
• Protected against corrosion (e.g. salt water)
