Remove the protective plastic
cover(1) and plastic cover (2).
5-
Install the escutcheon(1) slowly,
make sure the escutcheon keep
tight with the wall.
7-
Install the diverter handle (1),
make sure plastic washer (4) is on
top of handle (1),Use the allen key
tighten the handle screw(3), put on
the cap(2).Install the thermostatic
mixer handle(6) so that the safety
stop override button is at the 9:00
position.
Use the allen key(9) tighten the
handle screw(8), put on the cap(7).
Caution!
Please check the black
mark on the thermostatic cartridge
point to the rectangle notch on the
plastic parts, if not, please rotate
the brass parts. Then install the
handle.
8-
Open the stops:
Using screwdriver to open the
stops to maximum open status.
Caution!
Don t keep open when
the stops reach the maximum
open status, otherwise it may
broken.
6-
1
2
Open
1
2
3
6
9
4
5
8
7
′
For warranty issues call us at 1-855 472 4304 or send us an e-mail at [email protected]
For questions call us at 1-855 472 4304 or visit our website at www.inolav.com
1