For easy installation of your Inolav
faucet you will need:
·
To
READ ALL
the instructions completely before beginning.
·
To
READ ALL
warnings,care, and maintenance information.
®
You May Need
Thermostatic Valve Trim Installation
Instructions
Owners Manual
Technical information:
Installation Considerations:
For best results, We recommends that this unit be installed by a
licensed, professional plumber.
Please read over these instructions thoroughly before beginning
installation. Make sure that you have all tools and supplies needed to
complete the installation.
To prevent scald injury, the maximum output temperature of the shower
valve must be no higher than 120°F. In Massachusetts, the maximum
output temperature can be no higher than 112°F.
Keep this booklet and the receipt (or other proof of date and place of
purchase) for this product in a safe place. The receipt is required should
it be necessary to request warranty parts.
•
•
•
•
Recommended water pressure : 15 - 75 PSI
Max. water pressure : 145 PSI
Recommended hot water temp. : 120 - 140°F
Max. hot water temp: 176°F
Flow rate: Up outlet: 5 GPM@60 PSI
Left outlet: 5 GPM@60 PSI
Right outlet: 5 GPM@60 PSI
ASME A.112.18.1
For warranty issues call us at 1-855 472 4304 or send us an e-mail at [email protected]
For questions call us at 1-855 472 4304 or visit our website at www.inolav.com
IS203-1-1 IS203-1-2