CONFIDENTIAL and
PROPRIETARY
96-05070-00-01 rev D
DCR 20-328
INOGEN AT HOME OXYGEN
CONCENTRATOR TECHNICAL MANUAL
Page 10 of 15
ensure adequate air flow through the device. If the particle screen is not cleaned
frequently, the life expectancy of the concentrator will be shortened due to higher
internal operating temperatures.
Particle filters should be cleaned using a mild liquid detergent (such as Dawn
TM
) and
water solution; be sure the filter is rinsed in water and allowed to air dry before reuse.
Additional replacement filters may be obtained from Inogen (RP-400). There are other
types of filters inside the Inogen At Home that provide additional filtration. Maintenance
of these filters is not required under normal operating conditions.
3.2.3. Humidifier Bottle Refill
The humidifier bottle should be routinely refilled according to the manufacturer’s
instructions.
3.2.4. Surface Cleaning
The outside case should be cleaned using a cloth dampened with a solution of mild
liquid detergent (such as Dawn
TM
) and water. Avoid getting water in or around the
power jack or vents.
3.3. Expected Service Requirements
The following table is provided as an estimate only and assumes typical
environmental conditions for temperature, humidity, and air pollution. Any smoking
around the device will severely shorten its life expectancy. Please refer to product
warranty coverage terms.
Service Item
Estimated Service Requirement Frequency
Compressor
20,000 run hours
Columns
18 to 24 months
Valves
25,000 run hours
Particle Filter
20,000 run hours with regular cleaning by user
Cooling Fan
25,000 run hours
4. INOGEN AT HOME SYSTEM SPECIFICATIONS
Dimensions:
16.5”H (41.25 cm) x 13”W (15 cm) x 7”D (31 cm)
Weight:
18 lbs (8.2 kg.)
Noise:
<50 dBa
Warm-Up Time:
<5 minutes
Oxygen Concentration:
90 + 6/-3%
Flow Control Settings:
5 settings; 1-5 liters per minute
Power:
AC Power Supply
100-240 V, 50-60 Hz, 275 W Max
