User Guide
32
Parameter
Description
Password
Password to log into the SDN Controller.
Confirm Password
Confirmation of the password of the SDN Controller.
1. Click Submit.
Note
The SDN controller cannot be changed or removed. Only one (1) SDN controller
can be configured. To change the SDN controller, you must reset Defense4All
to factory settings. . In the FrameWork Setup pane, to the right of the Attack
Mitigation Systems (AMSs) label, click Add. . In the Add Attack Mitigation
System (AMS) pane, set the following parameters:
Parameter
Description
Name
AMS descriptive name.
Brand
Select the AMS brand from the drop-down list.
Values: Radware DefensePro, Other
Default: Radware
Note:
The Radware DefensePro device can be removed
only when there are no active mitigations (traffic
redirections to it).
Version
AMS version.
Note:
This parameter is only applicable to Radware
DefensePro.
IP Address
AMS IP address.
Note:
This parameter is only applicable to Radware
DefensePro.
Port
AMS port number.
Note:
This parameter is only applicable to Radware
DefensePro.
Username
AMS username.
Note:
This parameter is only applicable to Radware
DefensePro.
Password
Password to log into the AMS.
Note:
This parameter is only applicable to Radware
DefensePro.
Confirm Password
Confirmation of the password of the AMS.
Note:
This parameter is only applicable to Radware
DefensePro.
Health Check
Interval Time in seconds.
Note:
This parameter is only applicable to Radware
DefensePro. Default: 60 seconds
Note
Only relevant for DefensePro. Layer 2 Broadcast Destination MAC Address,
Multicast Destination MAC Address, Unrecognized L2 Format, and TTL Less
