© 2001 – 2022 inoage GmbH
|
MADRIX
®
is a registered trademark | [email protected]
|
www.madrix.com
1] Connect your device.
2] Enable drivers in the MADRIX
®
5 Software.
3] Activate the device in the MADRIX
®
5 Device Manager.
1] Connect Your Device
�
Connect your DMX line to the 5-pin, female XLR connector of MADRIX
®
USB ONE.
�
If you want to use DMX-IN, please use a 5-pin XLR male to 5-pin XLR male gender changer.
�
Connect your MADRIX
®
USB ONE to a free USB 2.0 port of your computer.
�
Make sure that the Microsoft
®
Windows
®
operating system recognizes the device.
Windows
®
will automatically install the drivers for the device.
2] Enable Drivers In The MADRIX
®
5 Software
�
In MADRIX
®
5, go to the menu 'Preferences' > 'Options...' > 'Devices USB'.
�
Activate 'MADRIX USB ONE / MADRIX NEO'.
[The option is activated by default.]
�
Click 'Apply' and 'OK'.
3] Activate The Device In The MADRIX
®
5 Device Manager
The MADRIX
®
USB ONE allows you to send [DMX-OUT] or receive [DMX-IN] data via MADRIX
®
5 using 512 DMX channels.
�
In MADRIX
®
5, go to the menu 'Preferences' > 'Device Manager...' > 'DMX Devices'.
�
Or press 'F4'.
�
Select your device in the list.
�
Right Mouse Click or Left Mouse Double-Click on the column 'State' to set from 'Off' to 'On' [indicated by green light].
�
A] Right Mouse Click or Left Mouse Double-Click on the column 'OUT / IN' to set to 'OUT' for data output.
�
B] Right Mouse Click or Left Mouse Double-Click on the column 'OUT / IN' to set to 'IN' for data input if you wish to receive incoming
data through this device.
�
When using your device as an output device, set up the correct DMX universe.
�
Right Mouse Click or Left Mouse Double-Click on the column 'Universe' and enter the required number.
For more information, see the MADRIX
®
5 User Manual.
Step-By-Step Configuration
Support
In case of further questions concerning handling of MADRIX
®
USB ONE or
technical problems, use the following resources for troubleshooting:
– Read the MADRIX
®
5 User Manual
– Contact your dealer
– Have a look at the website and online forum at
www.madrix.com
– You can also directly contact
Imprint
inoage GmbH
Wiener Straße 56
01219 Dresden
Germany
Web
www.madrix.com
Phone +49 351 862 6869 0
MADRIX
®
USB ONE –
Technical Manual & Quick Start Guide
