1
2019.10
0.5mm Pitch, 3.57mm depth One Action Lock, Vertical connection FPC/FFC/Shield FFC connector
FH67 Series
One Action Lock (Dimension diagram : 30pos.)
Fig.1
3.57mm
21.08mm
5.2mm
High FPC retention force
FPC/FFC can be checked from the top surface after mating.
Fig.4
Fig.5
Insert FPC/FFC
without opening the lock
lever before insertion!
Two-point contact design for dust prevention
Two-point independent spring contact
Fig.2
Supports FPC/FFC/Shield FFC
Fig.3
Ground contact and FFC Ground plate contact at multiple points.
Shield FFC
Ground
contact
Viewing section
Cannot see viewing section
Robust lock firmly retains FPC/FFC.
○ ：
Mated condition
× ：
Insufficient insertion condition
NEW
In cases where the application will demand a high level of reliability, such as automotive,
please contact a company representative for further information.
■
Features
1. Automatic one action lock design
One action locking by simply inserting FPC after
mounting contributes to enhanced workability. (Fig.1)
(Lock release by operating the lock lever when
removing.)
· Operation of the lock lever is not required at the time of
mating FPC. Can be inserted with one hand.
Contributes to reduced assembly time.
The lock lever will not be damaged by operation.
Mating failure due to FPC displacement does not occur
during lock lever operation.
2. Two-point contact prevents contact
failure by dust
· High contact reliability by independent spring two-point
contact design, preventing contact failure due to dust.
(Fig.2)
3. Supports FPC/FFC/Shield FFC
· FH67 allows you to choose from FPC/FFC/Shield FFC.
· Shielded FFC is acceptable for EMI prevention. (Fig.3)
4. High FPC retention force
· The circuit is automatically locked after FPC/FFC is
inserted by a one action. The notches on both sides of
FPC are held by the lock lever, generating a high FPC
retention force in spite of the small contact. (Fig.4)
5. Visual inspection on the mated status
of FPC/FFC is possible
· Insufficient insertion during assembly is prevented due
to lock lever protrusion after FPC/FFC insertion. (Fig.5)
6. Environmental
·
Halogen free
*As defined by IEC 61249-2-21.
Br : 900ppm max, Cl : 900ppm max, Br+Cl : 1,500ppm
max
Shielded FFC is acceptable for EMI prevention
Sep.1.2020 Copyright 2020 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
