26
8.
After the job is done
After the job done disconnect the PTO shaft, lift the machine and trans-
port it onto the appropriate place.
During transport reduce the speed, especially on bumpy roads.
The weight of the machine may render driving difficult and da-
mage the machine itself. During transport the machine must
be always in the central position.
PTO shaft must be disconnected during transport.
At disconnecting the machine respect the warning rules for at-
taching the machine.
Store the machine on a dry and flat ground to avoid any damage or
corrosion.
Cleaning
To avoid any corrosion clean the machine after each working day, espe-
cially working tools, bearings etc. Be careful to avoid damaging hydraulic
pipes, hydraulic cylinder, bearings and paint.
Fig. 20
